- Processing Talk
- Compare
- LE5040 vs LM2 Pro S2 5.5W
Genmitsu LE5040 vs Ortur LM2 Pro S2 5.5W
What LE5040 does better (2) and where LM2 Pro S2 5.5W wins (3) — every spec side by side.
vs
3.8Power & cutting4.2
3.5Speed4.8
9.0Work area7.7
3.2Safety7.1
2.2Features & ease of use4.6
Why is LE5040 better than LM2 Pro S2 5.5W?
- Work area (surface)2,000 cm² vs 1,600 cm²+25%
- Work area width (X)500 mm vs 400 mm+25%
Why is LM2 Pro S2 5.5W better than LE5040?
- Max engraving / travel speed167 mm/s vs 250 mm/s+50%
- Air assistNo · LE5040: Yes
- Flame / fire detectionNo · LE5040: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 5.5 W | 5.5 W |
| Work area | ||
| Work area | 500 × 400 mm | 400 × 400 mm |
| Work area width (X) | 500 mm | 400 mm |
| Work area depth (Y) | 400 mm | 400 mm |
| Work area (surface) | 2,000 cm² | 1,600 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | 250 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Compatible software | LaserGRBL, Candle | LightBurn |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Width | — | 600 mm |
| Depth | — | 570 mm |
| Height | — | 130 mm |
