- Processing Talk
- Compare
- Ador 10W vs H20 10W
FLUX Ador 10W vs Ortur H20 10W
What Ador 10W does better (3) and where H20 10W wins (0) — every spec side by side.
Why is Ador 10W better than H20 10W?
- Work area (surface)1,290 cm² vs 1,260 cm²+2%
- Max engraving / travel speed400 mm/s vs 333 mm/s+20%
- Work area width (X)430 mm vs 420 mm+2%
Why is H20 10W better than Ador 10W?
H20 10W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm), Infrared diode (1064 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | Yes |
| Wavelength | — | 1,064 nm |
| Frame material | — | Aluminium |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Second laser output power | — | 2 W |
| Work area | ||
| Work area | 430 × 300 mm | 420 × 300 mm |
| Work area width (X) | 430 mm | 420 mm |
| Work area depth (Y) | 300 mm | 300 mm |
| Work area (surface) | 1,290 cm² | 1,260 cm² |
| Max workpiece height | — | 98 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 333 mm/s |
| Safety | ||
| Enclosed (fully covered) | — | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | — | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | Yes |
| Autofocus / auto height | — | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Ethernet | USB, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | Yes | — |
| SD / TF card | — | Yes |
| Compatible software | Beam Studio | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| File formats | JPG, PNG, SVG, DXF, AI, PDF | — |
| Size & power | ||
| Width | 637 mm | — |
| Depth | 488 mm | — |
| Height | 226 mm | — |
| Weight | 19 kg | — |
