- Processing Talk
- Compare
- EC 60W vs Pro 3655 130W
Cloudray EC 60W vs OMTech Pro 3655 130W
What EC 60W does better (0) and where Pro 3655 130W wins (7) — every spec side by side.
vs
4.9Power & cutting8.9
2.2Work area8.6
4.7Safety4.7
3.1Features & ease of use6.6
Why is EC 60W better than Pro 3655 130W?
EC 60W has no measurable advantages in this pair.
Why is Pro 3655 130W better than EC 60W?
- Work area (surface)441 cm² vs 12,600 cm²28.6×
- Laser output power60 W vs 130 W2.2×
- Autofocus / auto heightNo · EC 60W: Yes
- Work area width (X)210 mm vs 1,400 mm6.7×
- Work area depth (Y)210 mm vs 900 mm4.3×
- Pass-through slotNo · EC 60W: Yes
- Wi-FiNo · EC 60W: Yes
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 60 W | 130 W |
| Work area | ||
| Work area | 210 × 210 mm | 1400 × 900 mm |
| Work area width (X) | 210 mm | 1,400 mm |
| Work area depth (Y) | 210 mm | 900 mm |
| Work area (surface) | 441 cm² | 12,600 cm² |
| Max workpiece height | — | 180 mm |
| Pass-through slot | No | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 1,200 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.02 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi |
| Wi-Fi | No | Yes |
| USB | Yes | Yes |
| Compatible software | LightBurn | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| Controller / firmware | — | Ruida |
| Size & power | ||
| Rated power consumption | 750 W | — |
