- Processing Talk
- Compare
- EC 30W vs Maker MF2028-80 90W
Cloudray EC 30W vs OMTech Maker MF2028-80 90W
What EC 30W does better (0) and where Maker MF2028-80 90W wins (6) — every spec side by side.
vs
2.2Power & cutting7.2
2.2Work area7.2
4.7Safety4.7
3.1Features & ease of use5.8
Why is EC 30W better than Maker MF2028-80 90W?
EC 30W has no measurable advantages in this pair.
Why is Maker MF2028-80 90W better than EC 30W?
- Laser output power30 W vs 90 W3×
- Work area (surface)441 cm² vs 3,612 cm²8.2×
- Autofocus / auto heightNo · EC 30W: Yes
- Work area width (X)210 mm vs 711 mm3.4×
- Work area depth (Y)210 mm vs 508 mm2.4×
- Pass-through slotNo · EC 30W: Yes
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 30 W | 90 W |
| Work area | ||
| Work area | 210 × 210 mm | 711 × 508 mm |
| Work area width (X) | 210 mm | 711 mm |
| Work area depth (Y) | 210 mm | 508 mm |
| Work area (surface) | 441 cm² | 3,612 cm² |
| Pass-through slot | No | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 600 mm/s |
| Precision | ||
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Ethernet |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| Compatible software | LightBurn | RDWorks |
| LightBurn compatible | Yes | — |
| File formats | — | AI, BMP, DXF, GIF, HPGL, JPG, PDF, PLT, PNG, SVG, TIFF |
| Size & power | ||
| Width | — | 1,450 mm |
| Depth | — | 871 mm |
| Height | — | 681 mm |
| Weight | — | 112.9 kg |
| Rated power consumption | 750 W | 90 W |
