- Processing Talk
- Compare
- Nomad 3 vs PROVerXL 6050 Plus
Carbide 3D Nomad 3 vs Genmitsu PROVerXL 6050 Plus
What Nomad 3 does better (0) and where PROVerXL 6050 Plus wins (6) — every spec side by side.
vs
3.7Precision5.2
2.9Work area6.0
6.5Safety3.1
2.4Features & ease of use2.4
Why is Nomad 3 better than PROVerXL 6050 Plus?
Nomad 3 has no measurable advantages in this pair.
Why is PROVerXL 6050 Plus better than Nomad 3?
- Work area (surface)412 cm² vs 1,200 cm²2.9×
- Closed-loop motors / servosNo · Nomad 3: Yes
- Z travel76 mm vs 110 mm+45%
- Ball screwsNo · Nomad 3: Yes
- Work area width (X)203 mm vs 400 mm+97%
- Work area depth (Y)203 mm vs 300 mm+48%
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Work area | ||
| Work area | 203 × 203 mm | 400 × 300 mm |
| Work area width (X) | 203 mm | 400 mm |
| Work area depth (Y) | 203 mm | 300 mm |
| Work area (surface) | 412 cm² | 1,200 cm² |
| Z travel | 76 mm | 110 mm |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 83 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.1 mm |
| Closed-loop motors / servos | No | Yes |
| Linear rails | Yes | Yes |
| Ball screws | No | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Lid interlock | Yes | — |
| Features | ||
| Laser module option (CNC) | No | No |
| Automatic tool changer | No | No |
| Tool length / Z probe | No | No |
| Connectivity & software | ||
| Compatible software | Vectric VCarve | Candle, UGS |
| Controller / firmware | — | GRBL |
| CNC milling | ||
| Spindle power | 130 W | — |
| Max spindle speed | 24,000 rpm | — |
| Collet | ER11 | — |
| Size & power | ||
| Width | — | 776 mm |
| Depth | — | 641 mm |
| Height | — | 580 mm |
