- Processing Talk
- Compare
- AL2 5.5W vs S30 5W
Aufero AL2 5.5W vs Sculpfun S30 5W
What AL2 5.5W does better (1) and where S30 5W wins (1) — every spec side by side.
Why is AL2 5.5W better than S30 5W?
- Laser output power5.5 W vs 5 W+10%
Why is S30 5W better than AL2 5.5W?
- Wi-FiNo · AL2 5.5W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 5.5 W | 5 W |
| Work area | ||
| Work area | — | 380 × 385 mm |
| Work area width (X) | — | 380 mm |
| Work area depth (Y) | — | 385 mm |
| Work area (surface) | — | 1,463 cm² |
| Work-area extension kit | — | Yes |
| Precision | ||
| Laser spot size | — | 0.06 mm |
| Positioning accuracy | — | 0.005 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi, Bluetooth, SD / USB drive |
| Wi-Fi | No | Yes |
| USB | Yes | Yes |
| Bluetooth | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Rated power consumption | — | 60 W |
