- Processing Talk
- Compare
- AL1 5.5W vs LM2 S2 5.5W
Aufero AL1 5.5W vs Ortur LM2 S2 5.5W
What AL1 5.5W does better (0) and where LM2 S2 5.5W wins (0) — every spec side by side.
vs
3.8Power & cutting4.2
3.2Safety4.9
3.4Features & ease of use2.7
Why is AL1 5.5W better than LM2 S2 5.5W?
AL1 5.5W has no measurable advantages in this pair.
Why is LM2 S2 5.5W better than AL1 5.5W?
LM2 S2 5.5W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 5.5 W | 5.5 W |
| Work area | ||
| Work area | 180 × 180 mm | — |
| Work area width (X) | 180 mm | — |
| Work area depth (Y) | 180 mm | — |
| Work area (surface) | 324 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | NC, DXF, BMP, JPG, PNG, SVG | — |
