- Processing Talk
- Compare
- Kraft Lite 40W vs K1 Pro 24W
AtomStack Kraft Lite 40W vs Ikier K1 Pro 24W
What Kraft Lite 40W does better (4) and where K1 Pro 24W wins (3) — every spec side by side.
vs
7.2Power & cutting8.4
7.1Work area8.5
9.2Safety6.7
9.8Features & ease of use7.9
Why is Kraft Lite 40W better than K1 Pro 24W?
- Laser output power40 W vs 24 W+67%
- Enclosed (fully covered)Yes · K1 Pro 24W: No
- Built-in cameraYes · K1 Pro 24W: No
- Work area width (X)498 mm vs 410 mm+21%
Why is K1 Pro 24W better than Kraft Lite 40W?
- Work area (surface)1,594 cm² vs 1,681 cm²+5%
- Weight23.6 kg vs 12 kg+97%
- Work area depth (Y)320 mm vs 410 mm+28%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm), Infrared diode (1064 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 40 W | 24 W |
| Second laser output power | 1.2 W | — |
| Work area | ||
| Work area | 498 × 320 mm | 410 × 410 mm |
| Work area width (X) | 498 mm | 410 mm |
| Work area depth (Y) | 320 mm | 410 mm |
| Work area (surface) | 1,594 cm² | 1,681 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 800 mm/s |
| Max cutting depth – wood / plywood (one pass) | 18 mm | — |
| Max cutting depth – acrylic | 5 mm | — |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | Yes | Yes |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 650 mm |
| Depth | — | 750 mm |
| Height | — | 222 mm |
| Weight | 23.6 kg | 12 kg |
| Input voltage | — | 100–240 V |
