- Processing Talk
- Compare
- Extended 10W vs Jinsoku LC-60A 5.5W
Algolaser Extended 10W vs SainSmart Jinsoku LC-60A 5.5W
What Extended 10W does better (5) and where Jinsoku LC-60A 5.5W wins (4) — every spec side by side.
vs
5.7Power & cutting3.8
4.4Speed3.5
7.7Work area9.3
4.9Safety6.9
8.4Features & ease of use4.6
Why is Extended 10W better than Jinsoku LC-60A 5.5W?
- Laser output power10 W vs 5.5 W+82%
- Built-in cameraYes · Jinsoku LC-60A 5.5W: No
- Max engraving / travel speed200 mm/s vs 167 mm/s+20%
- Wi-FiYes · Jinsoku LC-60A 5.5W: No
- Weight4.8 kg vs 6 kg+25%
Why is Jinsoku LC-60A 5.5W better than Extended 10W?
- Work area (surface)1,600 cm² vs 3,600 cm²2.2×
- Flame / fire detectionNo · Extended 10W: Yes
- Work area width (X)400 mm vs 600 mm+50%
- Work area depth (Y)400 mm vs 600 mm+50%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 5.5 W |
| Work area | ||
| Work area | 400 × 400 mm | 600 × 600 mm |
| Work area width (X) | 400 mm | 600 mm |
| Work area depth (Y) | 400 mm | 600 mm |
| Work area (surface) | 1,600 cm² | 3,600 cm² |
| Max workpiece height | — | 135 mm |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 200 mm/s | 167 mm/s |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | — | Yes |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | NC, BMP, JPG, PNG, DXF |
| Size & power | ||
| Width | 642 mm | — |
| Depth | 602 mm | — |
| Height | 182 mm | — |
| Weight | 4.8 kg | 6 kg |
| Rated power consumption | 120 W | — |
Related comparisons
vs
Algolaser Extended 10WvsCreality Falcon A1 10W
7.07.2
vs
AtomStack A10 Pro V2vsAlgolaser Extended 10W
6.97.0
vs
AtomStack A20 Pro V2vsAlgolaser Extended 10W
7.27.0
vs
Two Trees TTS-20 MaxvsAlgolaser Extended 10W
vs
Ortur LM2 Pro S2 10WvsSainSmart Jinsoku LC-60A 5.5W
6.56.2
vs
Longer Ray5 20WvsSainSmart Jinsoku LC-60A 5.5W
6.56.2