- Processing Talk
- Compare
- SM 60W vs G6 MOPA 30W
Acmer SM 60W vs Gweike G6 MOPA 30W
What SM 60W does better (4) and where G6 MOPA 30W wins (0) — every spec side by side.
vs
7.2Power & cutting4.0
4.9Speed4.9
5.1Work area3.0
4.7Safety4.7
5.6Features & ease of use5.6
Why is SM 60W better than G6 MOPA 30W?
- Laser output power60 W vs 30 W2×
- Work area (surface)225 cm² vs 121 cm²+86%
- Work area width (X)150 mm vs 110 mm+36%
- Work area depth (Y)150 mm vs 110 mm+36%
Why is G6 MOPA 30W better than SM 60W?
G6 MOPA 30W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | Yes |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 60 W | 30 W |
| Work area | ||
| Work area | 150 × 150 mm | 110 × 110 mm |
| Work area width (X) | 150 mm | 110 mm |
| Work area depth (Y) | 150 mm | 110 mm |
| Work area (surface) | 225 cm² | 121 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 10,000 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.001 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn, EZCAD2 |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Input voltage | — | 110–220 V |
