- Processing Talk
- Compare
- SM 50W vs G6 Split 30W
Acmer SM 50W vs Gweike G6 Split 30W
What SM 50W does better (4) and where G6 Split 30W wins (0) — every spec side by side.
vs
5.5Power & cutting4.0
5.1Work area3.0
4.7Safety4.7
5.6Features & ease of use5.6
Why is SM 50W better than G6 Split 30W?
- Work area (surface)225 cm² vs 121 cm²+86%
- Laser output power50 W vs 30 W+67%
- Work area width (X)150 mm vs 110 mm+36%
- Work area depth (Y)150 mm vs 110 mm+36%
Why is G6 Split 30W better than SM 50W?
G6 Split 30W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | — |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 30 W |
| Work area | ||
| Work area | 150 × 150 mm | 110 × 110 mm |
| Work area width (X) | 150 mm | 110 mm |
| Work area depth (Y) | 150 mm | 110 mm |
| Work area (surface) | 225 cm² | 121 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | — |
| Precision | ||
| Positioning accuracy | — | 0.001 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn, EZCAD2 |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Input voltage | — | 110–220 V |
Related comparisons
vs
Monport GM Pro Integrated JPT MOPA 30WvsAcmer SM 50W
4.85.3
vs
Monport GT Split Fiber 60WvsAcmer SM 50W
5.25.3
vs
Monport GM Pro Integrated 50WvsAcmer SM 50W
4.55.3
vs
Monport GT Split 50WvsAcmer SM 50W
4.55.3
vs
Acmer SM 50WvsCreality Falcon T1 Fiber 20W
5.35.1
vs
OMTech Integrated 50WvsAcmer SM 50W
5.45.3