- Processing Talk
- Compare
- PM 60W vs G6 Split 50W
Acmer PM 60W vs Gweike G6 Split 50W
What PM 60W does better (4) and where G6 Split 50W wins (0) — every spec side by side.
vs
7.2Power & cutting5.5
7.8Work area3.0
4.7Safety4.7
5.6Features & ease of use5.6
Why is PM 60W better than G6 Split 50W?
- Work area (surface)400 cm² vs 121 cm²3.3×
- Laser output power60 W vs 50 W+20%
- Work area width (X)200 mm vs 110 mm+82%
- Work area depth (Y)200 mm vs 110 mm+82%
Why is G6 Split 50W better than PM 60W?
G6 Split 50W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | — |
| Wavelength | — | 1,064 nm |
| Laser power | ||
| Laser output power | 60 W | 50 W |
| Work area | ||
| Work area | 200 × 200 mm | 110 × 110 mm |
| Work area width (X) | 200 mm | 110 mm |
| Work area depth (Y) | 200 mm | 110 mm |
| Work area (surface) | 400 cm² | 121 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | — |
| Precision | ||
| Positioning accuracy | — | 0.001 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn, EZCAD2 |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 470 mm | — |
| Depth | 350 mm | — |
| Height | 610 mm | — |
| Weight | 23 kg | — |
| Input voltage | — | 110–220 V |
Related comparisons
vs
Monport GM Pro Integrated JPT MOPA 60WvsAcmer PM 60W
6.37.4
vs
Monport GPro Vision Split MOPA 50WvsAcmer PM 60W
7.07.4
vs
OMTech Solis Duo 30WvsAcmer PM 60W
8.87.4
vs
OMTech Solis Duo 20WvsAcmer PM 60W
8.37.4
vs
Monport Autoforge XPro 30WvsAcmer PM 60W
8.17.4
vs
Acmer PM 60WvsCreality Falcon T1 MOPA 60W
7.47.6