- Processing Talk
- Compare
- P3 24W vs X40 Max
Acmer P3 24W vs AtomStack X40 Max
What P3 24W does better (2) and where X40 Max wins (1) — every spec side by side.
Why is P3 24W better than X40 Max?
- Enclosed (fully covered)Yes · X40 Max: No
- Built-in cameraYes · X40 Max: No
Why is X40 Max better than P3 24W?
- Air assistNo · P3 24W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 24 W | — |
| Work area | ||
| Work area | — | 800 × 400 mm |
| Work area width (X) | — | 800 mm |
| Work area depth (Y) | — | 400 mm |
| Work area (surface) | — | 3,200 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 25 mm |
| Precision | ||
| Laser spot size | 0.1 mm | 0.1 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | — | SD / USB drive |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
