- Processing Talk
- Compare
- P2 33W vs B1 30W
Acmer P2 33W vs Longer B1 30W
What P2 33W does better (5) and where B1 30W wins (1) — every spec side by side.
Why is P2 33W better than B1 30W?
- Work area (surface)3,360 cm² vs 1,980 cm²+70%
- Air assistYes · B1 30W: No
- Laser output power33 W vs 30 W+10%
- Max cutting depth – wood / plywood (one pass)30 mm vs 25 mm+20%
- Work area depth (Y)800 mm vs 440 mm+82%
Why is B1 30W better than P2 33W?
- Work area width (X)420 mm vs 450 mm+7%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 33 W | 30 W |
| Work area | ||
| Work area | 420 × 800 mm | 450 × 440 mm |
| Work area width (X) | 420 mm | 450 mm |
| Work area depth (Y) | 800 mm | 440 mm |
| Work area (surface) | 3,360 cm² | 1,980 cm² |
| Work-area extension kit | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | 25 mm |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, SD / USB drive |
| Wi-Fi | — | No |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
