- Processing Talk
- Compare
- P1 S pro 48W vs SF-A9 40W
Acmer P1 S pro 48W vs Sculpfun SF-A9 40W
What P1 S pro 48W does better (1) and where SF-A9 40W wins (5) — every spec side by side.
vs
9.4Power & cutting8.5
3.5Speed8.0
6.2Work area7.7
3.2Safety7.1
5.7Features & ease of use7.4
Why is P1 S pro 48W better than SF-A9 40W?
- Laser output power48 W vs 40 W+20%
Why is SF-A9 40W better than P1 S pro 48W?
- Max engraving / travel speed167 mm/s vs 600 mm/s3.6×
- Work area (surface)1,406 cm² vs 1,600 cm²+14%
- Flame / fire detectionNo · P1 S pro 48W: Yes
- Work area depth (Y)370 mm vs 400 mm+8%
- Work area width (X)380 mm vs 400 mm+5%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 48 W | 40 W |
| Work area | ||
| Work area | 380 × 370 mm | 400 × 400 mm |
| Work area width (X) | 380 mm | 400 mm |
| Work area depth (Y) | 370 mm | 400 mm |
| Work area (surface) | 1,406 cm² | 1,600 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 20 mm |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, Bluetooth |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Bluetooth | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
| Size & power | ||
| Width | — | 606 mm |
| Depth | — | 665 mm |
| Height | — | 110 mm |
| Weight | — | 6.2 kg |
