- Processing Talk
- Compare
- P1 S pro 48W vs X40 Max
Acmer P1 S pro 48W vs AtomStack X40 Max
What P1 S pro 48W does better (0) and where X40 Max wins (3) — every spec side by side.
vs
6.2Work area9.1
3.2Safety5.6
5.7Features & ease of use5.2
Why is P1 S pro 48W better than X40 Max?
P1 S pro 48W has no measurable advantages in this pair.
Why is X40 Max better than P1 S pro 48W?
- Work area (surface)1,406 cm² vs 3,200 cm²2.3×
- Work area width (X)380 mm vs 800 mm2.1×
- Work area depth (Y)370 mm vs 400 mm+8%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 48 W | — |
| Work area | ||
| Work area | 380 × 370 mm | 800 × 400 mm |
| Work area width (X) | 380 mm | 800 mm |
| Work area depth (Y) | 370 mm | 400 mm |
| Work area (surface) | 1,406 cm² | 3,200 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 25 mm |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | — | SD / USB drive |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
