- Processing Talk
- Compare
- P1 S pro 48W vs P2 33W
Acmer P1 S pro 48W vs Acmer P2 33W
What P1 S pro 48W does better (1) and where P2 33W wins (3) — every spec side by side.
vs
9.4Power & cutting8.7
6.2Work area9.2
3.2Safety6.0
5.7Features & ease of use5.0
Why is P1 S pro 48W better than P2 33W?
- Laser output power48 W vs 33 W+45%
Why is P2 33W better than P1 S pro 48W?
- Work area (surface)1,406 cm² vs 3,360 cm²2.4×
- Work area depth (Y)370 mm vs 800 mm2.2×
- Work area width (X)380 mm vs 420 mm+11%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 48 W | 33 W |
| Work area | ||
| Work area | 380 × 370 mm | 420 × 800 mm |
| Work area width (X) | 380 mm | 420 mm |
| Work area depth (Y) | 370 mm | 800 mm |
| Work area (surface) | 1,406 cm² | 3,360 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Precision | ||
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
