- Processing Talk
- Compare
- K1 3.5W vs K8 Mini 5W
Acmer K1 3.5W vs Wainlux K8 Mini 5W
What K1 3.5W does better (3) and where K8 Mini 5W wins (2) — every spec side by side.
vs
2.8Power & cutting3.5
4.7Precision6.0
4.0Work area3.0
9.6Safety9.6
2.9Features & ease of use5.2
Why is K1 3.5W better than K8 Mini 5W?
- Work area (surface)225 cm² vs 169 cm²+33%
- Work area width (X)150 mm vs 130 mm+15%
- Work area depth (Y)150 mm vs 130 mm+15%
Why is K8 Mini 5W better than K1 3.5W?
- Laser output power3.5 W vs 5 W+43%
- Built-in cameraNo · K1 3.5W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 3.5 W | 5 W |
| Work area | ||
| Work area | 150 × 150 mm | 130 × 130 mm |
| Work area width (X) | 150 mm | 130 mm |
| Work area depth (Y) | 150 mm | 130 mm |
| Work area (surface) | 225 cm² | 169 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 8 mm |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | 0.04 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | No | No |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | No | No |
| Built-in camera | No | Yes |
| Autofocus / auto height | No | No |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Phone app control | — | Yes |
| Compatible software | LightBurn | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 286 mm | — |
| Depth | 273 mm | — |
| Height | 190 mm | — |
| Weight | 2.4 kg | — |









